Skip to the content
Water DamagePortland OR

Water Damage Restoration Terms Explained in Plain English

The words you may hear during a water damage job, each explained in a sentence or two.

Why water damage restoration terms deserve plain English

Water damage restoration has its own vocabulary, and a technician may use several of these words in the first five minutes. Knowing what they mean helps you follow the plan, ask good questions and understand the records you get at the end. The terms are grouped by topic so related words sit together.

You do not need to learn them all. The most useful ones are the water category, the dry standard and the drying log, because they explain what is being removed, when the job is finished and how it is recorded. If a technician uses a word that is not here, ask them to explain it. A good one will happily put it in plain terms.

Water and contamination

Category one water
Clean water from a source that was safe to use, such as a supply pipe or a water heater. Often dried in place if drying starts early.
Category two water
Gray water with some contamination, such as a washing machine discharge or a dishwasher leak. Needs cleaning as well as drying.
Category three water
Black water that is grossly contaminated, such as sewage or outside flood water. Porous materials it touches are removed.
Class of water loss
A rating of how much water there is and how hard the job will be to dry, based on the area and the materials that got wet.
Wicking
Water moving up or along a material, such as drywall drawing water upward from a wet floor.
Secondary damage
Damage that happens after the original leak because the water was not removed or dried in time, such as mold, swelling and odor.
Antimicrobial
A product applied to surfaces to slow the growth of bacteria and mold after water damage.
Standing water
Water that is pooled on a surface rather than soaked into it. It is pumped or extracted before drying starts.
Saturation
The point where a material holds as much water as it can. Saturated pad and insulation are usually removed.

Measuring moisture

Moisture meter
A handheld tool that reads how much water is in a material. Pin meters push into the surface and pinless meters read through it.
Thermal camera
A camera that shows temperature differences. Damp areas often look cooler, which helps find water quickly. A meter confirms it.
Moisture mapping
Taking readings across floors, walls and ceilings to find the edges of the wet area, then marking and photographing it.
Dry standard
The reading of the same material in a dry part of the house. The wet area is dry when it reaches this number.
Relative humidity
How much water the air holds compared with the most it could hold at that temperature. Lower humidity speeds drying.
Drying log
A record of the readings, the equipment and the conditions on each visit, which shows the drying worked.
Psychrometry
The science of air, heat and moisture. Restoration crews use it to set up drying so the air stays dry enough to pull water out of the materials.
Grains per pound
A measure of how much water vapor is in the air. Falling numbers on the drying log show the dehumidifiers are working.

Equipment

Air mover
A low, powerful fan that blows air across wet surfaces to speed evaporation. Often set at an angle along the walls.
Dehumidifier
A machine that pulls water out of the air. Restoration dehumidifiers are larger than household ones and drain continuously.
Extraction wand
A tool connected to a powerful vacuum that pulls water out of carpet and pad.
Weighted extractor
A machine a technician stands on to press water out of carpet and pad as it is extracted.
Drying mat
A panel laid on hardwood that pulls air through the boards to dry them from inside.
Containment
Plastic sheeting that closes off the drying area, or the work area in a contaminated job, to control air and dust.
Truck mounted unit
A powerful extraction system built into a van, with hoses run into the house. It removes water faster than portable units.
Submersible pump
A pump placed in standing water, often in a basement or crawl space, to move large amounts of water out quickly.
Air scrubber
A machine with filters that cleans the air in a work area, often used during sewage or mold work.

Building parts

Subfloor
The layer of plywood or boards under the finished floor. It soaks up water that runs under carpet, vinyl and laminate.
Bottom plate
The horizontal piece of wood at the base of a framed wall. It sits on the floor and takes on water first.
Wall cavity
The space inside a wall between the drywall faces, often filled with insulation.
Toe kick
The recessed panel at the bottom of a kitchen or bathroom cabinet. Often particleboard that swells when wet.
Vapor barrier
A plastic sheet, often on the ground of a crawl space, that limits moisture rising into the house.
Tack strip
The wooden strip with small nails around the edge of a room that holds wall to wall carpet in place.
Carpet pad
The cushion layer under carpet. It soaks up water like a sponge and is usually replaced after water damage.
Joist
One of the horizontal beams that hold up a floor or a ceiling. Water often runs along the top of joists before it drips.
Flashing
Thin metal or membrane around chimneys, vents, windows and roof edges that sheds water. Failed flashing is a common leak source.

The work itself

Mitigation
The work done to stop the damage getting worse, such as extraction, removal of wet materials and drying.
Restoration
Putting the house back to how it was, which includes mitigation and then the repairs.
Flood cut
Removing the bottom section of drywall in a straight line, often a couple of feet up, so the wall cavity can dry or be cleaned.
Demolition
Taking out materials that cannot be saved, such as soaked pad, swollen cabinets or contaminated drywall.
Structural drying
Drying the building itself, meaning the framing, the subfloor and the walls, rather than only the surfaces.
Remediation
Removing contamination, such as mold growth or sewage, with containment and cleaning.
Pack out
Moving belongings out of the affected rooms, or out of the house, to protect them and make room for the work.
Sign off
The point where final readings confirm the structure is dry and the job can move to repairs.

Words you will hear about mold

Mold spores
Tiny particles that mold spreads through the air. They are present almost everywhere and only grow on damp material.
Musty odor
The earthy smell that often means mold or trapped moisture, even when nothing is visible.
Surface mold
Growth on a hard surface that can often be cleaned once the cause is fixed.
Hidden mold
Growth inside walls, under floors or behind cabinets, usually found by smell, readings or opening the area.
Spore count
A measure of how many mold spores are in a sample of air, sometimes compared with outdoor air to judge whether indoor levels are unusual.
Clearance check
A final inspection after mold or sewage work to confirm the area is clean before it is closed up and repaired.
Source control
Fixing whatever caused the moisture, such as a leak or poor drainage, so the mold does not return.

For more on keeping mold from starting, see mold prevention after water damage. For the water categories in detail, see clean, gray and black water explained.

Questions about restoration terms

What is the difference between mitigation and restoration?

Mitigation stops the damage getting worse through extraction, removal and drying. Restoration covers that and then the repairs that put the house back together.

What does a flood cut mean?

It means removing the bottom part of the drywall in a straight line so the cavity behind it can dry or be cleaned. It makes the repair neater too.

What is a dry standard?

It is the reading of the same material in a part of the house that did not get wet. The goal is to bring the wet material back to that number.

Why are there so many fans?

They are air movers, placed to move air across every wet surface. Together with dehumidifiers they dry far faster than open windows.

What does category three mean?

It means the water is grossly contaminated, as with sewage or outside flooding, so porous materials it touched are removed.

What is a drying log?

A record of readings and equipment on each visit. It shows the drying worked and is useful for insurance.